Skip to content

Choose a PCB

The circuit board. It decides hot-swap or solder, which layouts you can use, and the firmware.

Your build, 3 parts

Not finished

Back to your build

In your buildGazzew Boba U4T, KBDfans Module Foam, CannonKeys Switch Pads

Filters
Size
Hot-swap
Layout
Stabilizers
Availability

10 results

  • KBDfans Tofu TKL R2 Wired Solder PCB

    TKL · ANSI/ISO · Solder · Own-design fit · Group buy

    Check first

    ≈£22List price, converted
    Add

    This PCB is solder-only: you'll need to solder every switch.

  • KBDfans Tofu65 3.0 ISO Wired Hotswap PCB

    65% · ISO · Hot-swap · Own-design fit · Pre-order

    Fits

    ≈£29List price, converted
    Add
  • BM60 RGB Hot-swap PCB

    KPrepublic BM60 RGB Hot-swap PCB

    60% · ANSI · Hot-swap · GH60

    Fits, see note

    ≈£37List price, converted
    Add

    Gazzew Boba U4T is 5-pin but the board takes 3-pin. Snip the two small plastic legs before fitting them.

  • BM60 RGB ISO Hot-swap PCB

    KPrepublic BM60 RGB ISO Hot-swap PCB

    60% · ISO · Hot-swap · GH60

    Fits, see note

    ≈£37List price, converted
    Add

    Gazzew Boba U4T is 5-pin but the board takes 3-pin. Snip the two small plastic legs before fitting them.

  • Venom 60 MX PCB

    Geonworks Venom 60 MX PCB

    60% · ANSI · Hot-swap · GH60

    Fits, see note

    ≈£38List price, converted
    Add

    Gazzew Boba U4T is 5-pin but the board takes 3-pin. Snip the two small plastic legs before fitting them.

  • KBDfans DZ60 Rev 3.0 PCB

    60% · ANSI/ISO · Solder · GH60 · Discontinued

    Check first

    Price TBC
    Add

    This PCB is solder-only: you'll need to solder every switch.